GE Range PF Error: Power failure detected
This guide covers GE range PF error in detail to help you diagnose and resolve the issue. What Does GE Range Error Code PF Mean? Error code PF stands for Power Failure. It appears on all GE range lines — GE Profile PGS930 and P2S930, Café CGS750 and CGB550, Monogram series, and standard JB and […]
Quick Assessment
Answer to continue safely
Is it safe to keep using?
Yes. PF is an informational code — the range is fully functional once the code is cleared. Clear PF with Cancel/Off or the Clock button and resume normal cooking. Investigate the power supply only if PF recurs without a known outage.
Can I reset the code?
Yes. Press Cancel/Off or the Clock button to immediately clear PF. No circuit breaker reset is needed. The code clears with a single button press and the range resumes full operation.
When to stop immediately?
Stop if you notice: PF appears multiple times per week with no known power outages, Circuit breaker trips when the range is running — circuit overload issue.
Symptoms You May Notice
Oven shuts off mid-cook and displays PF when power returns
A cooking cycle in progress was interrupted by a power outage. When power is restored, the range displays PF and the oven remains off — the interrupted cycle is cancelled and must be restarted manually.
"PF" displayed on the panel with the clock reset to 12:00
After a power interruption, the range shows PF and the clock resets, confirming a complete power loss occurred. The oven is fully functional once PF is cleared.
All panel lights flash simultaneously on power restore
The control board reinitializes all display segments and indicator lights simultaneously when power returns from an outage, then settles to the PF notification display.
Timer or delayed bake feature cancelled
Any delayed start or timed bake programmed before the outage is wiped from memory. The PF code and clock reset both confirm the control board fully lost power.
Possible Causes
Household power outage or circuit breaker trip
A utility power outage or a tripped circuit breaker interrupted power to the range during an active cooking session, causing the control board to log a power failure event.
DIY PossibleLoose power cord or wall outlet connection
The range power cord partially disconnected from the outlet or the outlet terminals are loose, causing a brief power interruption that registers as a power failure on the control board.
DIY PossibleUnstable home electrical supply causing voltage drops
Recurring PF codes without a known outage can indicate the range circuit is sharing load with high-draw appliances, causing voltage drops that the control board registers as power failures.
Requires ProfessionalSafe Checks You Can Do
-
1
Clear the PF code and restart the cooking cycle
Press Cancel/Off or the Clock button to dismiss the PF notification. Reset the clock using the Clock key. Select your desired cooking function and restart the cycle. If food was in the oven during the outage, check its internal temperature with a food thermometer before consuming.
PF is informational only — the range is fully functional once cleared. Food safety: if the oven was off for more than 2 hours during an outage with perishables inside, discard the food.
-
2
Check the circuit breaker and power cord
If no household outage occurred, inspect the range's dedicated circuit breaker in the electrical panel — confirm it is fully ON. Pull the range slightly away from the wall and confirm the power cord is fully inserted in the outlet and the cord shows no damage.
GE electric ranges require a dedicated 240 V, 40–50 amp circuit. A shared or undersized circuit can trip intermittently, producing recurring PF codes.
-
3
Monitor for recurring PF without known outages
If PF appears more than twice within a month without a known household power event, note the time and frequency. Check whether other appliances on nearby circuits also experienced issues during the same events — this indicates a household electrical problem rather than a range fault.
A surge protector rated for 240 V ranges can protect the control board from voltage spikes that trigger PF, though most residential surge protectors only cover 120 V circuits.
When to Call a Professional
Contact a qualified technician if:
- PF occurs 3+ times per month with no household outages — electrical circuit evaluation needed
- Breaker trips under normal range load — electrician required, not an appliance technician
Need Professional Help?
Find qualified technicians in your area for proper diagnostics and repair.
Range Repair Service Schedule Appointment